isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200awmdp1t2a1m2re 2:1 2/14/2007 T201241 b tn 1 1 circuit: dpdt p.c. mounting 6.10 [.240 in] 25 ~ pos.1 pos. 2 pos. 1 pos. 2 pos. 3 switch function none on on 2-3, 5-6 open 2-1, 5-4 2 13 5 46 2.54 [.100 in] 5.08 [.200 in] note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: gold 5. rating: 0.4va @ 20vac or vdc max. 6. electric life: 50,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength : 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant a 15870 released for production 3/21/06 ph 8.13 [.320 in] 9.14 [.360 in] 13.39 [.527 in] 4.50 [.177 in] 2.54 [.100 in] 5.08 [.200 in] 3.30 [.130 in] .51 [.020 in] 2.54 [.100 in] ? .76 [.030 in] n 1.09 [.043 in] b 16999 updated notes, cleaned drawing 2/14/07 tn 4 5 6 epoxy seal e switch marking opposite side 63
|